[Ma...] Posted March 9 Share Posted March 9 Is it possible to align two scans (meshes) inside GOM INSPECT (non PRO)? Link to comment Share on other sites More sharing options...
[Na...] Posted March 9 Share Posted March 9 Hello Marcin, multipart projects are a Pro feature, so you are stuck with one nominal and one actual mesh element for alignments. If you want to compare a measured part before and after some machining for example, you can define one mesh as the nominal (ZEISS Quality Tech Guide (gom.com)) to compare them. Nanno Link to comment Share on other sites More sharing options...
[Ma...] Posted March 9 Author Share Posted March 9 I wanted only align one part of scan to other part of scan to unify both parts into one shell Link to comment Share on other sites More sharing options...
[An...] Posted March 21 Share Posted March 21 meybe you can use one as CAD ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in