Jump to content

Is there a way to fix a point to a surface and fix the point with the devormation?


---
 Share

Recommended Posts

I'm trying for days to find a way to fix two points to a surface component in GOM corrolate, but when the deformation starts the points are fixed to the x y z-coordinates.

The goal is to input two points in predetairmende coordinates and see the deformation just like point inspection. Does anyone know how to do this?

Link to comment
Share on other sites

  • 1 month later...

Dear Maarten,

you have to create a point on your surface. 

Construction → Point → Point 

Click on the surface where you would like to create your point. 

Greetings, Ivan

Link to comment
Share on other sites

  • 6 months later...

Hello Maarten,
as you describe it the feature you are searching for is new in ZEISS INSPECT Correlate 2023:

Construct a nominal point at given Coordinates

Give it the measuring principle "project onto actual" (Open I-Inspect to do this), choose your surface component to and use homologuos progression (default for surface components).
 image.png.c6dc9dc20c9691573378e89a449df207.pngimage.png.885da86a382e199435ac3d9a846d30fa.png

Take take of alignments and the stage you are projecting in. 😉

Best regards,
Thorsten

Link to comment
Share on other sites

 Share

×
×
  • Create New...