Jump to content

Polynom Surface


---
 Share

Recommended Posts

---

Hi, 

How to export polynomial surface in gom inspect, I am not able to export this surface from gom inspect it shows some error. 

Link to comment
Share on other sites

---

Hi Manoj,

In which format is the export required?

The polynominal surface itself can not be exported. But you can tessellate it (CONSTRUCT>Surface>Tessellate Geometrical Element) and export this surface instead.

Hope this helps.
Cheers, Sergio

Link to comment
Share on other sites

---

Hi Sergio, 

Good day!

I need this as IGES Format, 

I have created tessellate on that polynomial surface but still, I can't export that tessellates surface. 

Just for your info, I am using GOM 2019 free software version. 

Link to comment
Share on other sites

---

Hey,
The IGES format exports only standard geometry elements like circles, lines, points etc. or sections.
If you want to export mesh/tessellated structures you can either use the STL or G3D file format.

If kind CAD model is required the mesh has to be converted in a Reverse Engineering Tool like Zeiss Reverse Engineering.

Link to comment
Share on other sites

---

Hi Christine, 

Thanks for the info, But is it possible to export polynomial surfaces? Get it like standard geometry

If possible it would be great and time-saving for creating a CAD model from STL data.

 

Link to comment
Share on other sites

 Share

×
×
  • Create New...