How to Inspect Max Radius

[[Mo...]]

A part I am inspecting has a CAD model full of sharp edges. In reality, the part comes off the machine with rounded radii and the print specifies a max radius so I need to assign the radius a numerical value. What would be the most efficient way to determine the radius if it's not modelled in the CAD?

CAD model with sharp edges:

 

Actual mesh with rounded edges:

 

TIA

 

Edited August 12, 2022

[[Lu...]]

you can cut sections on mesh and create circles without the cad.

create the circles with fitting circle command. then when you evaluate you most input the nominal size.

Regards.